honeywell wifi thermostat installation guide

Welcome to the Honeywell WiFi Thermostat Installation Guide. This guide will walk you through the steps to install and set up your Honeywell WiFi thermostat. With this guide, you’ll be able to enjoy the convenience and energy efficiency of your new thermostat.

Tools You Will Need

Before you start the installation process, make sure you have the following tools:

• Phillips screwdriver
• Wire Stripper
• Screws and anchors (provided with the thermostat)
• 2 AA Batteries (provided with the thermostat)
• Thermostat literature (provided with the thermostat)

Compatibility

Make sure your Honeywell WiFi thermostat is compatible with your home’s electrical system. The thermostat requires a 24V, 60Hz input and supports 802.11 B/G/N home wireless networks.

Removing Your Old Thermostat

Before installing your new Honeywell WiFi thermostat, you’ll need to remove your old thermostat; Follow these steps:

1. Turn off the power to your heating and cooling system at the circuit breaker or fuse box.
2. Remove the screws that hold your old thermostat in place.
3. Gently pull the old thermostat away from the wall.
4. Disconnect the wires from the old thermostat.

Installing Your Honeywell WiFi Thermostat

Now it’s time to install your new Honeywell WiFi thermostat. Follow these steps:

1. Mount the thermostat to the wall using the provided screws and anchors.
2. Connect the wires to the thermostat, making sure to match the correct terminals.
3. Insert the 2 AA batteries into the thermostat.
4. Turn the power back on at the circuit breaker or fuse box.

Setup with Lyric App

To get the most out of your Honeywell WiFi thermostat, you’ll need to set it up with the Lyric app. Follow these steps:

1. Download the Lyric app from the App Store or Google Play.
2. Create an account or log in to your existing account.
3. Follow the in-app instructions to connect your thermostat to your home’s WiFi network.
4. Configure your thermostat settings, such as the temperature and schedule.

Using Your Honeywell WiFi Thermostat

Now that your thermostat is installed and set up, you can start using it to control your home’s temperature. Here are some tips to get you started:

• Use the touchscreen interface to adjust the temperature and settings.
• Use the Lyric app to control your thermostat remotely.
• Take advantage of features like geofencing and smart alerts to optimize your energy usage.

Troubleshooting

If you encounter any issues during the installation or setup process, refer to the troubleshooting section in your thermostat’s literature or contact Honeywell’s customer support at 1-800-633-3991 or honeywellhomessupporthoneywell.com.

With this guide, you should now have a fully functional Honeywell WiFi thermostat installed and set up in your home. Enjoy the convenience, energy efficiency, and cost savings that come with your new thermostat.